Honeywell Tuxedo Touch Скачать руководство пользователя | Manualshive

Страница: 17 / 64

background image

Using Pictures, Cameras and Videos (cont'd)

13

Add / Edit Options

Name

Description
NOTE: Must be alphanumeric only, no special characters (including space)
are compatible.

Camera Name

Default is the Camera Model (abbreviated) X, where X= The Mac

NOTE

:

Maximum # of cameras supported.

Camera IP Address

This is the address of the camera, which is assigned by the router

MJPEG Streaming URL

Fixed

RTSP

(Real Time Streaming Protocol) Port #. Select ports (554, (1024-65534))

Resolution

(Options are 160x120, 320x240, 640x480)
Select from 160 x 120, 320 x 240 or 640 x 480. For best performance set
video resolution to 320 x 240, 8 frames per sec.

Notes:

•

Model iPCAM-WL resolution is fixed at 320 x 240 or user can change to

640x480.

•

When setting the resolution to 640 x 480, the recommended frame rate is

8 frames per sec.

•

When setting the resolution to 320 x 240, the recommended frame rate is

no more than 15 frames per sec.

Camera Model:

Select iPCAM-WI, iPCAM-WI2, iPCAM-WI2B (black), iPCAM-WO or iPCAM-
PT, WVC210, iPCAM-ACU, iPCAM-WL, ONVIF, Trendnet, and others.

NOTE

: Only the Honeywell AlarmNet IP cameras will work with Total

Connect Remote Services. Refer to HTTPS://mywebtech.honeywell.com or
www.tuxedotouchtoolkit.com for the “Camera Compatibility” documentation.

RTSP Streaming URL

Real Time Streaming Protocol, if using a Non-AlarmNet IP camera, this
information will be retrieved from the camera or the cameras interface page.

Mobile Streaming URL

Fixed

HTTP Port

Default value = 80. To change enter valid port number (80 (1024-65534)).

NOTE:

Do not use ports 6665-6669 for camera HTTP configuration. These

ports block MPEG streaming and PT commands of Safari based PC and
mobile devices.

Frame Rate

Options are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, or 30.

User Name/Password

Administrative password to access the camera’s setup or viewing page.

5. If using Total Connect, press

Total Connect

to reset the camera to factory defaults, which allow remote viewing

through Total Connect. A pop-up window displays:

“For remote camera viewing service, please contact your alarm

company and ask for Total Connect™ service and provide the camera’s MAC ID XX:XX:XX:XX:XX:XX. Press
continue to prepare the camera for Total Connect service.”

Press

CONTINUE

or

CANCEL.

If you press

Continue

a confirmation window displays: “Do you want to reset the Camera?”

Yes

or

No

. See Remote Services section, later in

this document. Press

Save

when done

.

Press

Refresh

to update the screen, if necessary.

«
...
15
16
17
18
19
...
»

Содержание Tuxedo Touch

































































Отзывы:

Нет отзывов

Похожие инструкции для Tuxedo Touch

Бренд: Huawei Страницы: 58

Бренд: Huawei Страницы: 104

Бренд: Siemens Страницы: 2

Бренд: Siemens Страницы: 87

Бренд: Trust Страницы: 11

Бренд: PLH Products Страницы: 7

Бренд: Marmitek Страницы: 16

Бренд: Louvolite Страницы: 3

Leviton OmniTouch 7

Бренд: Epygi Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды