Honda NC700 2012, Руководство по обслуживанию

Страница: 691 / 773

20-10
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
ABS INDICATOR PROBLEM CODE INDEX
• The ABS indicator might blink in the following cases. Correct the faulty part.
– Incorrect tire pressure.
– Tires not recommended for the motorcycle were installed (incorrect tire size).
– Deformation of the wheel or tire.
• The ABS indicator might blink while riding under the following conditions. This is temporary failure. Be sure to erase the problem
code (page 20-9).
Then, test ride the motorcycle above 10 km/h (6 mph) and check the problem code by retrieving the self-diagnosis system (page
20-8). Ask the rider for the riding conditions in detail when the motorcycle is brought in for inspection.
– The motorcycle has continuously run bumpy roads.
– The front wheel leaves the ground for a long time when riding (wheelie).
– Only either the front or rear wheel rotates.
– The ABS operates continuously.
– The ABS control unit has been disrupted by an extremely powerful radio wave (electromagnetic interference).
Problem
Code
Function failure
Detection
Symptom/Fail-safe function
Refer
to A B
–
• ABS modulator voltage input line
• Indicator related wires
• Speedometer
• ABS modulator
• ABS fuse 7.5 A (ABS MAIN) • ABS indicator never come
ON at all
20-12
• ABS indicator stays ON at all
20-13
11
Front wheel speed sensor circuit malfunction
• Wheel speed sensor or related wires
O O
• Stops ABS operation
20-15
13
Rear wheel speed sensor malfunction
• Wheel speed sensor or related wires
O O 20-17
12
Front wheel speed sensor circuit malfunction
• Wheel speed sensor or related wires
• Electromagnetic interference
O
• Stops ABS operation
20-15
14
Rear wheel speed sensor malfunction
• Wheel speed sensor, pulser ring or related
wires
• Electromagnetic interference
O 20-17
21
Front pulser ring
• Pulser ring or related wires
O
• Stops ABS operation
20-15
23
Rear pulser ring
• Pulser ring or related wires
O 20-17
31 Solenoid valve malfunction (ABS modulator)
O O
• Stops ABS operation
20-19
32
33
34
37
38
41
Front wheel lock
• Riding condition
O
• Stops ABS operation
20-15
42
Front wheel lock (Wheelie)
• Riding condition
O
43
Rear wheel lock
• Riding condition
O 20-17
51
Motor lock
• Pump motor (ABS modulator) or related
wires
• ABS fuse 30 A (ABS M.)
O O
• Stops ABS operation
20-20 52
Motor stuck off
• Pump motor (ABS modulator) or related
wires
• ABS fuse 30 A (ABS M.)
O O
53
Motor stuck on
• Pump motor (ABS modulator) or related
wires
• ABS fuse 30 A (ABS M.)
O O
54
Fail-safe relay malfunction
• Fail-safe relay (ABS modulator) or related
wires
• ABS fuse 30 A (ABS SOL.)
O O
• Stops ABS operation
20-21