Honda NC700 2012, Руководство по обслуживанию

Страница: 536 / 773

15-13
dummyhead dummyhead
CRANKSHAFT/PISTON/CYLINDER
Letters (A, B, C or
D) on the crank
weight are the
crankpin O.D.
codes from left to
right.
If you are replacing the crankshaft, record the
corresponding crankpin O.D. code letter [1].
If you are reusing the crankshaft, measure the crankpin
O.D. with a micrometer.
Cross-reference the connecting rod and crankpin codes
to determine the replacement bearing color code [1].
CRANKPIN BEARING SELECTION TABLE:
After selecting new bearings, recheck the clearance
with a plastigauge. Incorrect clearance can cause
severe engine damage.
BEARING INSTALLATION
Clean the bearing outer surfaces, crankpin bearing cap
and connecting rod.
Install the crankpin bearings [1] onto the bearing cap
and connecting rod, aligning each tab with each groove.
[1]
CRANKPIN BEARING THICKNESS:
B: Black: Thickest
C: Brown:
D: Green:
E: Yellow:
F: Pink:
G: Red:
H: White: Thinnest
[1]
CONNECTING ROD I.D. CODE
1 2 3 4
43.000 – 43.006 mm
(1.6929 – 1.6931 in) 43.006 – 43.012 mm
(1.6931 – 1.6934 in) 43.012 – 43.018 mm
(1.6934 – 1.6936 in) 43.018 – 43.024 mm
(1.6936 – 1.6939 in)
CRANKPIN
O.D. CODE
A
39.994 – 40.000 mm
(1.5746 – 1.5748 in)
H (White) G (Red) F (Pink) E (Yellow)
B
39.988 – 39.994 mm
(1.5743 – 1.5746 in)
G (Red) F (Pink) E (Yellow) D (Green)
C
39.982 – 39.988 mm
(1.5741 – 1.5743 in)
F (Pink) E (Yellow) D (Green) C (Brown)
D
39.976 – 39.982 mm
(1.5739 – 1.5741 in)
E (Yellow) D (Green) C (Brown) B (Black)
[1]
Align