Honda NC700 2012, Руководство по обслуживанию

Страница: 538 / 773

15-15
dummyhead dummyhead
CRANKSHAFT/PISTON/CYLINDER
Never use a wire
brush; it will scratch
the groove.
Clean carbon deposits from the piston ring grooves with
a ring that will be discarded.
PISTON REMOVAL
Assemble the special tools as shown.
Temporarily install the pilot collar [1] to the piston pin
pilot, and adjust the piston base head inserts [2] as
shown, then tighten the screws [3].
Remove the pilot collar.
Assemble and adjust the length of the insert pin [1] and
insert adjuster [2] to 44.0 mm (1.73 in).
TOOLS:
Piston pin tool set
07PAF-0010000
–
Piston base head [1] 07PAF-0010400
–
Piston pin pilot [2] 07PAF-0010300
–
Piston base spring [3] 07973-6570600
–
Piston base [4] 07973-6570500
[1]
[4]
[2]
[3]
TOOLS:
Piston pin tool set
07PAF-0010000
–
Piston base head insert 07PAF-0010500
–
Pilot collar, 18 mm 07PAF-0010640
1.0 mm (0.04 in)
[3]
[2]
[3]
[2] [1] [1]
[2]
[3]
TOOLS:
Piston pin tool set
07PAF-0010000
–
Insert pin 07PAF-0010700
–
Insert adjuster 07PAF-0010800
[2] [1]
44.0 mm (1.73 in)