Honda NC700 2012, Руководство по обслуживанию

Страница: 542 / 773

15-19
dummyhead dummyhead
CRANKSHAFT/PISTON/CYLINDER
Apply engine oil to the piston pin outer surface.
Adjust the length of the insert pin [1] and insert adjuster
[2] to 44.0 mm (1.73 in).
Insert the pilot collar [3] into the piston [4] and
connecting rod [5].
Place the piston, connecting rod and pilot collar on the
special tools.
Be sure to position the piston flat area against the
piston base head inserts as shown.
Place the piston pin [7], insert pin/insert adjuster on the
pilot collar.
Place the piston [1], connecting rod [2], piston pin [3]
and special tools on the hydraulic press.
Press the piston pin until special tools fully seated.
TOOLS:
Piston pin tool set
07PAF-0010000
–
Insert pin 07PAF-0010700
–
Insert adjuster 07PAF-0010800
TOOL:
Piston pin tool set
07PAF-0010000
–
Pilot collar, 18 mm 07PAF-0010640
TOOLS:
Piston pin tool set [6]
07PAF-0010000
–
Piston base head insert 07PAF-0010500
–
Piston base head 07PAF-0010400
–
Piston pin pilot 07PAF-0010300
–
Piston base spring 07973-6570600
–
Piston base 07973-6570500
[4] [1]/[2]
[6]
44.0 mm
(1.73 in)
[5]
[3]
[7]
[3]
[1]
[2]