Honda NC700 2012, Руководство по обслуживанию

Страница: 502 / 773

14-11
dummyhead dummyhead
CRANKCASE/TRANSMISSION/BALANCER
TRANSMISSION
Check the gear shifter groove [1] and gear dogs [2] for
abnormal wear or damage.
Check the dog holes and teeth for abnormal wear or
damage.
Measure the I.D. of each gear.
Measure the O.D. of each gear bushing.
Measure the I.D. of each gear bushing.
Calculate the gear-to-bushing clearance.
Check the mainshaft and countershaft for abnormal
wear or damage.
Measure the mainshaft O.D. at the M5 bushing.
Measure the countershaft O.D. at the C2 bushing.
Calculate the gear bushing-to-shaft clearance.
[1] [2]
SERVICE LIMITS:
M5, M6, C1: 28.04 mm (1.104 in)
C2, C3, C4: 31.04 mm (1.222 in)
SERVICE LIMITS:
M5, M6: 27.94 mm (1.100 in)
C2, C3, C4: 30.93 mm (1.218 in)
SERVICE LIMITS:
M5: 25.04 mm (0.986 in)
C2: 28.02 mm (1.103 in)
SERVICE LIMITS:
M5, M6: 0.08 mm (0.003 in)
C2:
0.10 mm (0.004 in)
C3, C4: 0.11 mm (0.004 in)
SERVICE LIMIT: 24.95 mm (0.982 in)
SERVICE LIMIT: 27.95 mm (1.100 in)
SERVICE LIMITS:
M5: 0.09 mm (0.004 in)
C2: 0.06 mm (0.002 in)
C2
M5