Honda NC700 2012, Руководство по обслуживанию

Страница: 591 / 773

17-20
dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
INNER WEIGHT REPLACEMENT
Remove the throttle pipe or grip rubber from the
handlebar.
– NC700X/XA/S/SA (page 17-10)
– NC700XD/SD (page 17-12)
Straighten the retainer ring tab [1] by the screwdriver or
punch.
Temporarily install the handlebar weight [2] and screw,
then remove the inner weight assembly [3] by turning
the handlebar weight.
Remove the screw [1], handlebar weight [2], retainer
ring [3] and rubber cushions [4] from the inner weight
[5].
Install the rubber cushions and new retainer ring onto
the inner weight.
Install the handlebar weight to the inner weight align
with each cut-outs of the inner weight and handlebar
weight.
Install and tighten the handlebar weight screw.
Install the inner weight assembly [1] into the handlebar.
Turn the inner weight and hook the weight retainer tab
[2] with the tab locking hole [3] in the handlebar.
Remove the screw and handlebar weight.
Install the throttle pipe and grip rubber to the handlebar.
– NC700X/XA/S/SA (page 17-14)
– NC700XD/SD (page 17-17)
FRONT WHEEL
REMOVAL
NC700X/S:
Remove the front brake caliper mounting bolts [1] and
slide the brake caliper/bracket assembly [2].
Do not suspend the brake caliper/bracket assembly
from the brake hose. Do not twist the brake hose.
Apply lubricant
spray through the
tab locking hole [4]
to the rubber
cushions [5] for
easy removal.
[4] [1] [5]
[2] [3]
[5]
[3]
[4]
[2]
[1]
[1]
[3] [2]
NC700X/S:
[2]
[1]