Honda NC700 2012, Руководство по обслуживанию

Страница: 22 / 773

1-17
dummyhead dummyhead
GENERAL INFORMATION
COOLING SYSTEM
LUBRICATION SYSTEM
CYLINDER HEAD/VALVES
CLUTCH/GEARSHIFT LINKAGE (NC700X/XA/S/SA)
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Water hose band screw 6 – – See page 8-9
See page 8-10
See page 8-14
Fan motor shroud mounting bolt 3 6 8.4 (0.9, 6.2)
Fan motor mounting screw 3 4 2.7 (0.3, 2.0)
Cooling fan mounting nut 1 3 1.0 (0.1, 0.7) Apply locking agent to the threads.
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Engine oil filter cartridge 1 20 26 (2.7, 19) Apply engine oil to the threads.
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Cylinder head cover socket bolt 3 6 10 (1.0, 7)
Breather plate mounting bolt 8 6 12 (1.2, 9) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Rocker arm shaft bolt 3 8 29 (3.0, 21) Apply engine oil to the threads and
seating surface.
Camshaft maintenance cap 1 36 4.0 (0.4, 3.0) See page 10-11
See page 10-28
Cam chain tensioner bolt 2 6 12 (1.2, 9)
Cam sprocket bolt 1 10 56 (5.7, 41) Apply engine oil to the threads and
seating surface.
Water hose band screw 6 – – See page 10-16
Insulator band screw 1 5 – See page 10-25
Cylinder head special bolt 6 9 44 (4.5, 32) Apply molybdenum oil solution to the
threads and seating surface.
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Clutch center lock nut 1 18 128 (13.1, 94) Apply engine oil to the threads and
seating surface.
Lock nut; replace with a new one and
stake.
Clutch lifter plate bolt 4 6 12 (1.2, 9)
Primary drive gear mounting bolt 1 10 93 (9.5, 69) Apply engine oil to the threads and
seating surface.
Shift drum stopper arm pivot bolt 1 6 12 (1.2, 9) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Shift drum center socket bolt 1 8 23 (2.3, 17) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Gearshift pedal adjuster lock nut 2 6 10 (1.0, 7)
Gearshift pedal pivot bolt 1 8 27 (2.8, 20)