Holip HLP-A100 Series, Руководство по эксплуатации

Страница: 70 / 187

HLP-A100 Series
HLP-A100 Series Operating Manual -
63
-
C01.55 Function Description Range Unit Default Setting
V/F Characteristic-V 0~999.9 V 0/Vn
Function: This parameter is an array parameter [0-5], used for setting
voltage [V0-V5] at each frequency point to manually form a V/
F characteristic matching motor. Frequency points are defined in
par. C01.56, V/F characteristics - F.
Description of choice: This parameter is only functional when par.
C01.01, Motor Control Principle is set to V/F [0].
Attention: V0 factory setting is set to 0V, and U1-U5 factory setting is set
to Un (motor rated voltage) .
C01.50 Function Description Range Unit Default Setting
Motor Magnetisation
at zero speed
0~300 % 100
Function: Enter a percentage value of the rated magnetizing current.
Description of the choice: Use this par. with par. 1-52 to obtain a different
thermal load on the motor when running at low speed.
Attention: If the setting is too low; the torque on the motor may be
reduced.
C01.52 Function Description Range Unit Default Setting
Min Speed Normal
Magnetizing
0.0~10.0 Hz 100
Function: Set the required frequency for normal magnetising current.
Use this par. along with par. 1-50.
Attention: If the frequency is set lower than the motor slip frequency, par.
C01.50 is inactive.
C01.5* Load Indep.Setting