Hinowa LightLift 15.70 3S, Техническое руководство

Страница: 64 / 137

64
9. ELECTRICAL SYSTEM
The electrical system is described by this booklet with the only purpose of
illustrate the machine electric devices and logics, for further detailed and in
case of technical assistance required it should be considered the wiring
diagrams.
9.1 ELECTRONIC BOARDS INTRODUCTION AND LOCATION
Machine is managed by a control modules composed by the electronic boards
described here below that interact each other and with machine sensors and
actuators.
The main board, called master board or ECM1, controls the main machine
functions including the movements, is located on the right side of the electric
components compartment on the machine rear side, ECM1 is just behind the
modem.
The modem carries out the communication with Hinowa server, further details
are described on RAHM technical training.
The load cell board, called ECM3, is inside the jib arm box, it works together
with load cell sensor to measure the weight in the basket.
MODEM
ECM 1
ECM 3