i-Kiosk 100 Plus
4 feet / 1.2 meter
(recommended)
Fingerprint Color Multimedia for Time Attendance &
Door Access Control System
Step 1
Determine the Location and Positioning
of the Installation
•
Avoid installing the terminals in locations that has contact with
a strong light source (e.g direct sunlight, spotlight, fluorescent
light, etc)
•
Avoid installing the terminals in locations prone to high moisture
or condensation levels in the air
•
The recommended installation height of the terminal from the
ground is 1.2 meter.
Step 2
Mounting Terminals
•
After measuring the height accordingly and make relevant marking
on the wall, drill the screws into the wall to secure the back plate.
•
Attach the terminal to the back plate and tighten the screws. Refer to
Appendix II for dimensions and measurements of installation.
Step 3
Wiring for Power Supply
i-Kiosk 100 Plus comes with a special key to unlock ports to power
and door access as shown in the diagram marked B. There are two
ways to connect the power to i-Kiosk 100 Plus.
1. Use the power adapter provided in the package and in-
sert the power adapter to the port marked A in the diagram.
2. Use power cables (black and red) to connect to a linear
power supply with specifications of 12VDC 3A. (Marked B)
Installation Guide
© 2015 Timetec Computing Sdn Bhd. All rights reserved.• 022015
TCP/IP PORT (LAN)
USB PORT
RS232/RS485 SERIAL
CABLE PORT
USB Port
POWER ADAPTER PORT (A)
POWER CABLE PORT (B)