• MAC Address — a unique identifier for the library controller network interface
• Full Qualified Domain Name — the fully qualified domain name for the library
• Clock Synchronization Configuration (SNTP) — When Enabled, the library displays the current time and
date from the configured SNTP server.
When IPv4 Addressing is Enabled, you can see, but not modify:
• IPv4 DNS Server 1 and IPv4 DNS Server 2 — addresses of the configured DNS servers used when
DHCP Addressing is not Enabled.
• DHCPv4 Addressing — When Enabled, the library will request an IP address from a DHCP server each
time the device is booted.
• IPv4 Address — the library network address
• Subnet Mask — The network mask of the library controller used when DHCP Addressing is not Enabled.
• Default Gateway — the gateway used when DHCP Addressing is not Enabled.
When IPv6 Addressing is Enabled, you can see, but not modify:
• Stateless Addressing — when Enabled, the device will generate an address for itself based on the routing
information obtained from a router advertisement and the MAC address. The device can manage up to five
global addresses at the same time, which can be assigned from different routers.
• DHCPv6 Addressing — when Enabled, the library will request an IP address from a DHCP server each
time the device is booted.
• Static Addressing — when Enabled, the device will use a statically configured address.
• Static Assigned Address — the IPv6 address when Static Addressing Enabled is On.
Status
The Status > Library page
The
Status > Library
page displays dynamic information about the device. When you click
Refresh
, the
status is updated immediately.
66
Status
