Figure 79: Error code in the OCP Error Log
The code
9B
is the main error code,
37
is the error sub-code, and
31
is sub-code specific information for
factory use only. When you press
Enter
, the OCP displays the error message.
Figure 80: Error message in the OCP Error Log
If you press
Next
, the OCP will display additional information, if available.
Figure 81: No additional information in the OCP error log
If you press
Next
again, the OCP will display the date and time in the format:
YYYY-MM-DD
followed by the
time in 24–hour clock format, where 1:00 pm is 13:00.
Figure 82: Date and time in the OCP error log
Finding error code information on the MSL4048, MSL8048 and MSL8096 OCP
Error codes are displayed in pop-up messages when an error occurs during an operation that is initiated from
the OCP.
The message shows the error code and a description of the error.
For example:
8D 52Mechanical Block
Where:
8D is the main error code 52 is the error sub-code.
The error log contains a list of all errors, with a separate row for each error. The log shows the Date/Time,
Code, and Description.
For example,
24/06/05 01:48
D7 50
System Error
Finding error code information on the MSL4048, MSL8048 and MSL8096
OCP
167
