Hewlett Packard Enterprise StoreEver 8096, Руководство пользователя и сервисное руководство

Страница: 109 / 245

Prerequisites
The administrator password.
Procedure
1. From the Home screen, press Previous or Next until the screen displays Configuration . Press Enter to
select.
2. Press Previous or Next until the screen displays Library Behavior . Press Enter to select.
3. Enter the administrator password if prompted.
4. Press Previous or Next until the screen displays Library Mode . Press Enter .
5. The screen displays Set Library Mode , followed by the current librarymode: Automatic , Sequential , or
Random . To change the mode, press Enter .
6. Press Previous or Next to scroll through the screens for Automatic , Sequential , or Random . Press
Enter to select the library mode.
7. If you enabled Sequential mode, you can configure the Autoload and Loop options:
a. Press Previous or Next until the screen displays Autoload Mode Disable or Autoload Mode Enable .
To change the Autoload mode, press Enter . The screen displays either Disable Autoload Mode or
Enable Autoload Mode. Press Previous or Next to toggle between the enabled and disabled screens.
Press Enter to select the Autoload mode. The display shows the new Autoload mode.
b. Press Previous or Next until the screen displays either Loop Mode Disable or Loop Mode Enable . To
change loop mode, press Enter. The screen displays either Enable Loop Mode or Disable Loop
Mode. Press Previous or Next to toggle between the enabled and disabled screens. Press Enter to
select the loop mode.
Setting the date and time (Configuration > Library Date/Time)
NOTE:
When setting the hours, the time is based on a 24-hour clock. There is no a.m. or p.m. designation.
Use Set Date and Time to set the date and time used to record events. Access to this feature requires the
administrator password.
Procedure
1. From the Home screen, press Previous or Next until the screen displays Configuration . Press Enter to
select.
2. Press Previous or Next until the screen displays Library Date/Time . Press Enter to select.
3. Enter the administrator password if prompted.
4. The screen displays Set Yr/Month/Day 2012 / 07 / 21 with a flashing number. Press Previous or Next to
change the value of the flashing number. Press Enter to accept the value of the flashing number and move
to the next number.
Setting the date and time (Configuration > Library Date/Time) 109