• Library mode
• Number of reserved slots
• Status of the mailslot
• Library LUN Host Drive
A Fibre Channel library also displays the WW Node Name for the FC node to which it is connected.
World Wide names are assigned automatically; they cannot be configured.
Viewing identity information (Info > Identity Drives)
Displays the status of the selected drive. It shows the SCSI ID, physical drive number, serial number, firmware
revision, element address, the ID string, and whether the drive is the library LUN host drive.
The following additional information is displayed for a Fibre Channel drive:
• WWide Node Name for the FC node to which the tape drive is connected.
• WWide Port Name and Port Type for Port A.
• WWide Port Name and Port Type for Port B.
NOTE:
Use the Left or Right buttons to toggle through the identity information for all drives without returning to the
Info -> Identity
menu.
World Wide names are assigned automatically; they cannot be configured.
Viewing inventory information (Info > Inventory)
Inventory information can be displayed for a magazine or for a drive.
•
Magazine:
The first inventory screen displays the contents of magazine number 1 (lower left). The top
section of this screen shows which mailslots are occupied (shaded background) or empty (white
background). If the mailslot is enabled, the storage slot count is reduced. The lower section gives more
information about each slot. Mailslots are identified in the Slot column as MS1, MS2, or MS3. The label
shows any barcode details. Slots containing tapes without barcodes are labeled Full. Info shows whether
the tape is write-protected (WP) or if that media needs attention (!). Use the Left or Right buttons to scroll
through and view the inventory for all magazines.
•
Drive:
This screen displays the contents of each drive. The Label column identifies which tape is in the
drive and the Source column identifies the slot from which it came. Other information defines the type of
tape (data or cleaning) and whether tapes are write-protected or valid/invalid.
Viewing network information (Info > Network)
This option provides information about the network setting for the library. This screen will show information
about the network connectivity of the library. If DHCP is ON, the values currently being found by DHCP for IP
Addr, Netmask and Gateway will be displayed.
Configuration menu
The Configuration menu provides the following options:
134
Viewing identity information (Info > Identity Drives)
