Event code
Description
Details and Solution
5B
Invalid cartridge. LTO3 media is not
supported with encryption enabled.
• Verify that the tape cartridge is
supported.
• Update the tape drive firmware to the
latest version to use LTO3 media.
5C
IPv6 will not be supported after downgrading
firmware.
Change the network settings to IPv4 before
downgrading firmware.
5D
Wrong drive firmware — invalid drive
firmware type.
Drive firmware is specific to the drive model
and interface. Select the drive firmware
specific to this drive. If the firmware file
could have been renamed, obtain a new
copy of the firmware file.
5E
Illegal drive position of FH drive.
In the MSL4048, a full-height tape drive
cannot be installed in the middle two drive
bays; it must be installed in either the upper
two drive bays or lower two drive bays.
Reinstall the tape drive in a supported drive
bay.
5F
No firmware downgrade possible.
The device firmware cannot be downgraded
in cases that would compromise encrypted
data, critical component support, or license
terms.
Check the configuration settings. If the
device has been using the Encryption Kit,
you might need to disable encryption before
downgrading firmware.
If the library extender is installed, you might
need to uninstall the library extender before
downgrading firmware.
60
Cleaning tape installed.
Complete the cleaning process and retry the
operation.
61
Cleaning failure. Cleaning process could not
be performed.
• Check cleaning tape and exchange if
necessary.
• Retry the operation.
62
Cleaning tape expired.
Exchange the cleaning tape.
Table Continued
202
Troubleshooting information and procedures
