◦ Installed, failed — The power supply installed in the unit is not working and the library no longer has
redundant power. Replace the power supply.
NOTE:
If the MSL4048 has two power supplies and one fails, after a power cycle the library will not recognize
the failed power supply as installed in the library.
The number of power supplies installed in the library is displayed next to the icon.
◦ MSL8048 and MSL8096 — Removed — a power supply was installed in this location before but has
been removed. Power Supply 1 will always show
Removed
when it is missing. Power Supply 2 will
show
Removed
until the library is rebooted.
• Security Status — indicates the security status when encryption is enabled.
The green
Status Ok
icon indicates that encryption is enabled, the encryption token is inserted,
and no operator attention is required.
The blue exclamation point
Status Warning
icon indicates that user attention is necessary. For
example, the token is not inserted or the token PIN has not been entered. For additional
information, see the event log.
The red X
Status Error
icon indicates that user intervention is required and that the device is
not capable of encrypting data.
The Help link
For additional information about fields on the RMI screens, click the
Help
link in the upper right corner. The
help pages are updated with most firmware updates and often contain technical details that are not contained
in this document.
Figure 26: Help link
Identity
The Identity > Library page
The library provides static information about the device.
The Help link
61
