CAUTION:
Since loop mode will endlessly cycle through the tapes, it is possible to overwrite old data. To
avoid overwriting data, ensure that the library has enough tapes or that the tapes are regularly
rotated in and out of the library.
◦ Autoload — the library will automatically load the tape from the lowest numbered full slot on power-up.
• WWide Node Name — a world wide unique identifier that the library reports over SCSI and might be used
by operating systems or software applications to identify and track the library.
• Library Controller Version — version of the controller installed in the device.
The Identity > Drive page
The
Identity > Drive
page provides detailed information about the tape drives. You will only see the fields that
apply to the interface type of the drives installed in this library.
Figure 28: Identity > Drive page (Fibre Channel)
The Identity > Drive page
63
