HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 278 / 695

Programming contours
6.6 Path contours – FK free contour programming (option 19)
6
278
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Circle center CC, radius and direction of rotation in the FC/FCT
block
The TNC calculates a circle center for free-programmed arcs from
the data you enter. This makes it possible to program full circles in
an FK program block.
If you wish to define the circle center in polar coordinates you must
use FPOL, not
CC
, to define the pole. FPOL is entered in Cartesian
coordinates and remains in effect until the control encounters a
block in which another
FPOL
is defined.
A circle center that was calculated or programmed
conventionally is then no longer valid as a pole or
circle center for the new FK contour: If you enter
conventional polar coordinates that refer to a pole
from a CC block you have defined previously, then
you must enter the pole again in a CC block after the
FK contour.
Soft keys Known data
Circle center in Cartesian coordinates
Center point in polar coordinates
Rotational direction of the arc
Radius of an arc
Example NC blocks
N10 FC CCX+20 CCY+15 DR+ R15*
N20 FPOL X+20 Y+15*
N30 FL AN+40*
N40 FC DR+ R15 CCPR+35 CCPA+40*