HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 228 / 695

Tools
5.4 Tool management (option number 93)
5
228
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Editing with active form view
If the form view is active, the following functions are available to
you:
Soft key Editing functions, form view
Select the tool data of the previous tool
Select the tool data of the next tool
Select previous tool index (only active if indexing is
enabled)
Select the next tool index (only active if indexing is
enabled)
Discard all changes made since the form was called
Add tool index
Delete tool index
Copy the tool data of the selected tool
Insert the copied tool data in the selected tool
Deleting marked tool data
Using this function you can simply delete tool data that you no
longer need.
Follow the steps outlined below for deleting:
In the tool management you use the arrow keys or mouse to
mark the tool data that you wish to delete
Select the
DELETE MARKED TOOLS
soft key and the TNC shows
a pop-up window listing the tool data to be deleted
Press the
START
soft key to start the delete process: The TNC
shows the status of the delete process in a pop-up window
Terminate the delete process by pressing the
END
key or soft
key
The TNC deletes all the data of all the tools
selected. Make sure that you really no longer
need the tool data, because there is no Undo
function available.
You cannot delete the tool data of tools still stored
in the pocket table. First remove the tool from the
magazine.