HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 464 / 695

Multiple axismachining
12.4 Miscellaneous functions for rotary axes
12
464
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
M128 on tilting tables
If you program a tilting table movement while
M128
is active, the
TNC rotates the coordinate system accordingly. If, for example,
you rotate the C axis by 90° (through a positioning command or
datum shift) and then program a movement in the X axis, the TNC
executes the movement in the machine axis Y.
The TNC also transforms the set datum, which has been shifted by
the movement of the rotary table.
M128 with 3-D tool compensation
If you carry out a three-dimensional tool compensation with
active
M128
and active radius compensation /
G41
/
G42
, the TNC
will automatically position the rotary axes for certain machine
geometrical configurations (peripheral milling).
Further Information: "Three-dimensional tool compensation
(option 9)", page
Effect
M128
becomes effective at the start of the block,
M129
at the end
of the block.
M128
is also effective in the manual operating modes
and remains active even after a change of mode. The feed rate for
the compensation movement will be effective until you program a
new feed rate or until you cancel
M128
with
M129
.
Enter
M129
to cancel
M128
. The TNC also cancels
M128
if you
select a new program in a program run operating mode.
Example NC blocks
Feed rate of 1000 mm/min for compensation movements:
N50 G01 G41 X+0 Y+38.5 IB-15 F125 M128 F1000*