HEIDENHAIN TNC 620 Programming Station, Руководство пользователя, Страница: 185 / 695

Error messages 4.8
4
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
185
Clearing errors
Clearing errors outside of the error window
Clear the errors/messages in the header: Press
the
CE
key
In certain situations you cannot use the
CE
key for
deleting the errors because the key is used for other
functions.
Deleting errors
Open the error window
Clear individual errors: Position the cursor on the
error message and press the
DELETE
soft key.
Delete all error messages: Press the
DELETE ALL
soft key.
If the cause of the error has not been corrected for
that error it cannot be deleted. In this case, the error
message remains in the window.
Error log
The TNC stores errors occurred and important events (e.g. system
start) in an error log. The capacity of the error log is limited. If the
log is full, the TNC uses a second file. If this is also full, the first
error log is deleted and newly written etc. If required, switch from
CURRENT FILE
to
PREVIOUS FILE
to view the history.
Open the error window.
Press the
LOG FILES
soft key.
Open the error log file: Press the
ERROR LOG
soft
key.
Set the previous error log if required: Press the
PREVIOUS FILE
soft key.
Set the current error log if required: Press the
CURRENT FILE
soft key.
The oldest entry is at the beginning of the log file, and the most
recent entry is at the end.