HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 25 / 695

TNC model, software and features
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
25
Upper and lower cases for a file name can be modified in the
file management
If a larger file is transferred to a USB device in the file
management, the control displays a warning until file transfer is
completed, see "USB devices on the TNC", page 164
In the file management, the control also shows the momentary
type filter with the path
In the file management the
SHOW ALL
soft key is now displayed
in all operating modes
In the file management the function
SELECT DIRECTORY
was
modified for copying files or directories. The soft keys
OK
and
CANCEL
are available on the first two positions
The colors of the programming graphics were changed, see
"Programming graphics", page 179
In
Test run
and
Programming
operating modes the tool data is
reset if a program is reselected or restarted with the
RESET +
START
soft key
In
Test run
operating mode the control displays the datum of
the machine tool table as the reference point with
BLANK IN
WORK SPACE
, see "Show the workpiece blank in the working
space (option 20)", page 566
After modification of the active datum, resuming the program is
only possible after
GOTO
or mid-program startup, see "Moving
the machine axes during an interruption", page 576
With mid-program startup an FK sequence can be entered, see
"Any entry into program: Mid-program startup", page 581
Mid-program startup operation and dialog guidance has been
improved, also for pallet tables, see "Any entry into program:
Mid-program startup", page 581