HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 494 / 695

Manual Operation and Setup
14.2 Moving the machine axes
14
494
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Incremental jog positioning
With incremental jog positioning the TNC moves the currently
active handwheel axis by a preset increment defined by you:
Press the handwheel soft key F2 (
STEP
)
Activate incremental jog positioning: Press handwheel soft key
3 (
ON
)
Select the desired jog increment by pressing the
F1
or
F2
key.
If you press and hold the respective key, each time it reaches a
decimal value 0 the TNC increases the counting increment by
a factor of 10. By also pressing the
CTRL
key, you can increase
the counting increment to 1. The smallest possible increment is
0.0001 mm (0.00001 inches). The largest possible increment is
10 mm (0.3937 inches).
Confirm the selected jog increment with soft key 4
(OK)
With the
+
or
-
handwheel key, move the active handwheel axis
in the corresponding direction
Inputting miscellaneous functions M
Press the
F3
(
MSF
) handwheel soft key
Press the
F1
(
M
) handwheel soft key
Select the desired M function number by pressing the
F1
or
F2
key
Execute the M miscellaneous function with the
NC START
key
Entering the spindle speed S
Press the
F3
(
MSF
) handwheel soft key
Press the
F2
(
S
) handwheel soft key
Select the desired speed by pressing the
F1
or
F2
key. If
you press and hold the respective key, each time it reaches a
decimal value 0 the TNC increases the counting increment by
a factor of 10. By also pressing the
CTRL
key, you can increase
the counting increment to 1000
Activate the new speed S with the
NC START
key