HEIDENHAIN TNC 620 Programming Station, Руководство пользователя, Страница: 672 / 695

Tables and Overviews
18.5 Functions of the TNC 620 and the iTNC 530 compared
18
672
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Function TNC 620 iTNC 530
Datum table:
Sorting function by values
within an axis Available Not available
Resetting the table Available Not available
Hiding axes that are not
present Available Available
Switching the list/form view Switchover via split-screen key Switchover by toggle soft key
Inserting individual line Allowed everywhere,
renumbering possible after
request. Empty line is inserted,
must be filled with zeros
manually Only allowed at the end of the
table. Line with value 0 in all
columns is inserted
Transfer of actual position
values on individual axis to the
datum table using the keys Not available Available
Transfer of actual position
values on all active axes to the
datum table using the keys Not available Available
Capturing the last positions
measured by TS using the keys Not available Available
FK free contour programming:
Programming of parallel axes With X/Y coordinates,
independent of machine type;
switchover with
FUNCTION
PARAXMODE
Machine-dependent with the
existing parallel axes
Automatic correction of relative
references Relative references in contour
subprograms are not corrected
automatically All relative references are
corrected automatically