HEIDENHAIN TNC 620 Programming Station, Руководство пользователя

Страница: 215 / 695

Tool data 5.2
5
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
215
Tool change
Automatic tool change
The tool change function can vary depending on
the individual machine tool. Refer to your machine
manual.
If your machine tool has automatic tool changing capability, the
program run is not interrupted. When the TNC reaches a tool
call with
T
, it replaces the inserted tool by another from the tool
magazine.
Automatic tool change if the tool life expires: M101
The function of
M101
can vary depending on the
individual machine tool. Refer to your machine
manual.
When the specified tool life has expired, the TNC can automatically
insert a replacement tool and continue machining with it. Activate
the miscellaneous function
M101
for this.
M101
is reset with
M102.
Enter the respective tool life after which machining is to be
continued with a replacement tool in the
TIME2
column of the tool
table. In the
CUR_TIME
column the TNC enters the current tool life.
If the current tool life is higher than the value entered in the
TIME2
column, a replacement tool will be inserted at the next possible
point in the program no later than one minute after expiration of
the tool life. The change is made only after the NC block has been
completed.
The TNC performs the automatic tool change at a suitable point in
the program. The automatic tool change is not performed:
During execution of machining cycles
While radius compensation (
G41
/
G42
) is active
Directly after an approach function
APPR
Directly before a departure function
DEP
Directly before and after
G24
and
G25
During execution of macros
During execution of a tool change
Directly after a
T
block or
G99
During execution of SL cycles