HDG M299, Руководство по эксплуатации

Страница: 83 / 176

©
HDG Bavaria GmbH 07/2008 HDG M299/300/350/400 - Version 1 - en
6 Using the heating system – Calling up information, selecting and modifying parameters
83
6.5 Calling up information, selecting and modi-
fying parameters
On the display of the control panel for the HDG Control, you can call
up various information as well as select and modify parameters.
Due the freely programmable design and the numerous options in
heating system combinations, especially in regard to the extraction
technology, the number of parameters can vary greatly.
S
TANDARD DISPLAY
The standard display shows you various information, such as
operating status of the heating system, hours of operation, boiler
temperature and the time.
Material stop
• The level indicator in the combustion chamber has signalled.
• There is too much material in the combustion chamber.
• The heating system waits until the level indicator enables filling
again.
Combustion chamber
temperature stop
• The maximum permitted temperature in the combustion
chamber has been exceeded.
• The heating system waits until the combustion chamber falls back
below the maximum permitted temperature.
Maintenance On
• The maintenance function is activated.
• The burn-out time has elapsed.
•
The flue gas fan is running.
Operating status Description
Table 6/1 - Operating statuses (continuation)
When restarting after a power outage, the heating system resumes
the operating mode last used if no safety-relevant functions have
been triggered.
Heating OFF 0.0 hrs
Boiler temperature : 40 °C 15:55
ON
OFF
°C
QTY
TIME MAN. SERVICE INFO