HDG M299, Руководство по эксплуатации

Страница: 142 / 176

7 Cleaning and servicing the heating system – Procedure
142
HDG M299/300/350/400 - Version 1 - en
©
HDG Bavaria GmbH 07/2008
3. Open the clamp locks (3).
4. Lift up the lid (1) and remove it.
5. Check the fill level of the ash containers (2).
✓
If the ash containers are not yet full, reclose them.
✓
If the ash containers are full, empty them.
6. Do this by lifting up the clamp handle (4) and releasing the stop on
the ash container (2).
7. Pull the ash container (2) forward out of the ash channel (5) of the
ash removal system.
8. Empty the ash into a fireproof container.
9. Reinsert the ash container (2) in the heating system in the reverse
order.
10. Deactivate the maintenance function.
✎
See section “Maintenance function” in this chapter.
✓
The ash containers have been emptied.
C
LEANING THE CLEANING SHAFT
Figure 7/10 - Checking and emptying the fly ash container
1
5
2 4 3
Important!
✎
Observe the “Generally applicable safety instructions” in this
section.
Warning!
Risk of crushing injury
The cleaning shaft lid is very heavy and can fall shut. Hands and
arms could thereby be crushed.
Take care not to bump into the opened cleaning shaft lid and cause
it to fall shut.