Delete a Water Feature -
From this screen, if you wish to delete a water feature
that is currently configured, select the Delete button on the right of the name of the
water feature that you wish to delete.
If Standalone Lights is selected:
Add Standalone Light -
Pressing “Add Standalone Light” from this screen will take
you through the full configuration for adding new ColorLogic Standalone lights (UCL,
CL 4.0 or CL 2.5). These steps are described in the Advanced Configuration Guide
section of this manual.
Select Group of Lights -
Once you select a group of ColorLogic Standalone Lights,
all of the options for those lights will appear on the next screen. These options are
as follows:
Name -
Create a custom name if desired.
Type -
Select the type of lights configured (UCL, CL4.0 or CL 2.5).
Relay -
Select the relay(s) that is wired to the group of lights.
Set Mode -
Set the mode of the lights configured (UCL, CL4.0 or CL 2.5).
Delete Group of Lights -
From this screen, if you wish to delete a group of lights
that is currently configured, select the Delete button on the right of the name of the
lights group that you wish to delete.
If Accessories is selected:
Add Accessory -
Pressing “Add Accessory” from this screen will take you through
the full configuration for adding a new accessory. These steps are described in the
Advanced Configuration Guide section of this manual.
Select an Accessory -
Once you select an accessory, all of the options for that ac-
cessory will appear on the next screen. These options are as follows:
Name -
Create a custom name if desired.
Type -
Select the type of accessory configured (Laminar, Dimmer, etc.).
Pump -
Configure the accessory pump, if used.
Valve -
Configure the accessory valve, if used.
Speed -
Change the minimum and maximum allowed speeds of the accessory
pump as well as the Low, Medium and High speed settings. This option only
appears if the accessory pump is configured as a VSP.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
48
