Hayward HL23510VSP Скачать руководство пользователя

Страница: 48 / 56

Freeze Protect -

Select whether you want the cleaner to turn on for Freeze Pro-

tection. Also set the Freeze Protect air temperature threshold from this menu.

Valve Cycle -

Configure the valve cycling time period for the cleaner. This option

is only available if the cleaner has an assigned valve.

Speed -

Change the minimum and maximum allowed speeds of the cleaner as

well as the Low, Medium and High speed settings. This option only appears if

the cleaner pump is configured as a variable speed pump.

Priming -

Select whether you want the cleaner pump to prime. This option only

appears if the cleaner pump is configured as a 2-Speed or VSP.

Delete a Cleaner -

From this screen, if you wish to delete a cleaner that is currently

configured, select the Delete button on the right of the name of the cleaner that you

wish to delete.

If Water Features is selected:

Add Water Feature -

Pressing “Add Water Feature” from this screen will take you

through the full configuration for adding a new water feature. These steps are de-

scribed in the Advanced Configuration Guide section of this manual.

Select a Water Feature -

Once you select a water feature, all of the options for that

water feature will appear on the next screen. These options are as follows:

Name -

Create a custom name if desired.

Type -

Change the type of water feature that is configured (Waterfall, Waterslide,

etc.).

Pump -

Configure the water feature pump, if used.

Relay -

Select the relay that is wired to the water feature. This option appears

only if the water feature does not have an associated pump configured.

Valve -

Configure the water feature valve, if used.

Speed -

Change the minimum and maximum allowed speeds of the water fea-

ture pump as well as the Low, Medium and High speed settings. This option

only appears if the water feature pump is configured as a VSP.

Priming -

Select whether you want the water feature pump to prime. This option

is only available if the water feature pump is configured as a 2-Speed or VSP.

Freeze Protect -

Select whether you want the water feature to turn on for Freeze

Protection. Also set the Freeze Protect air temperature threshold from this

menu.

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Содержание HL23510VSP

























































Результаты поиска

Содержание HL23510VSP

Отзывы:

Похожие инструкции для HL23510VSP

Бренды по названию

Популярные бренды

Hayward HL23510VSP, Руководство по установке

Результаты поиска

Содержание HL23510VSP

Отзывы:

Похожие инструкции для HL23510VSP

Бренды по названию

Популярные бренды