Control Pad
The Control Pad is weather resistant and comes with a 15 ft cord. Its resistive touch screen with
flip down cover is designed to function year round directly in the elements. Because it plugs into the
Hub, it should be mounted close by, but in a location that is convenient for the user to periodically
view and change pool/spa settings.
The Control Pad features a USB connector for firmware updates and an Ethernet connector for an
optional direct connection to your router (if wifi won't be used).
Smart Relay
Smart Relays have 15 ft cable that wire to the Hub. They're used to control high voltage 115 or 230
VAC pool equipment like lights, water features, pumps and more. Power to the intended load must
be supplied separately and run through the Smart Relay. Smart Relays are rated for up to 20 amps
at 230 volts.
Temperature Sensors
Depending on your installation, up to 3 temperature sensors may be used. The VS Omni requires
a water temperature sensor for heater operation. If freeze protection is desired, an air temperature
sensor is also required. For solar heating systems, a solar sensor is necessary. Even if your instal-
lation doesn't require the use of temperature sensors, installing water and air sensors provides a
convenience to the user, especially during remote use.
Flow Switch (not included)
An optional flow switch can be used to detect leaks or clogs in the pool/spa plumbing.
Input Power or
Existing Timeclock
Wiring Hub
(Optional)
Smart Relay 2
To Feature,
Accessory,
Lights, etc.
Variable
Speed Pump
Filter
Valve
Actuator
Heater
TO
POOL
FROM
POOL
Power
to VSP
Input Power to
Smart Relay 1
Comm. to Smart
Relay 1 (15’)
Comm. to
Heater
Comm. to
Valve Actuator
Comm.
to VSP
To Solar
REMOTE
RELAY
OFFLINE:
ON/OFF
Smart Relay 1
Input
Power
Comm. to Smart
Relay 2 (15’)
Control Pad
To Feature,
Accessory,
Lights, etc.
Wireless
Connection
OR
Ethernet to
Router
Comm. to
Controller (15’)
Sensor 1
(Water Temp.)
Sensor 2
(Air Temp.)
Sensor 3 (Solar OR
External Input)
(Optional)
Flow Switch
REMOTE
RELAY
OFFLINE:
ON/OFF
Wiring Whip
5
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
