Pre-Programmed Configuration Wizard Guide
As you progress through the Configuration Wizard, refer to the following information to help answer
questions and make selections.
Connect to Home Network
- The first thing you will do in the Configuration Wizard is connect to you
home network. Refer to the “Connect to Home Network” section on page 24 for more information
on this part of the Configuration Wizard.
Configuration Summary
- Since you chose the “Pre-Programmed” configuration, you will be
brought immediately to the Configuration Summary screen after connecting to your home network.
This screen details all of the equipment that you have connected and configured to your VS Omni.
Verify that the information on this screen is correct and then press the check mark to continue.
Finished with Configuration
- After verifying the configuration summary, you are now finished
with configuration and can choose to either save the configuration by pressing “Save and Restart”
or make an additional change to the configuration by pressing “Customize / Add Components”. If
you choose to edit the configuration, you will be brought to “Quick Edit” interface that allows you to
quickly select the equipment that you want to add or modify. See page 43 for information on Quick
Edit. Once you finish making your changes, save the configuration by pressing the save button on
the bottom of the screen.
Typical Configuration Wizard Guide
As you progress through the Configuration Wizard, refer to the following information to help answer
questions and make selections.
Connect to Home Network
- The first thing you will do in the Configuration Wizard is connect to you
home network. Refer to the “Connect to Home Network” section on page 24 for more information
on this part of the Configuration Wizard.
Time and Date
- Set the current date and time using a 12hr clock (AM/PM) or 24hr clock (military
time). Save by touching the Done button when finished. NOTE: When registering the VS Omni and
creating a web account, you’ll be prompted to enter a Time Zone. Be sure to enter the same time
zone as the physical location of the VS Omni, otherwise schedules and timers will be inaccurate.
Select Desired Units of Measure (Standard or Metric)
- If Standard is selected, temperatures will
be displayed in Fahrenheit and chemistry readings will be in ppm. If Metric is selected, temperatures
will be displayed in Celsius and chemistry readings will be in g/L.
Select Desired Units of Measure (Speed in % or Speed in RPM)
- If Speed in % is selected,
then pump speeds will be displayed in %. If Speed in RPM is selected, then pump speeds will be
displayed in RPM.
Which Hayward Unique Address?
Select the HUA of the filter pump. NOTE: this option only ap-
pears if more than one variable speed pump is discovered.
Do you want to control a heater?
Select whether or not you have a heater connected to the VS
Omni.
25
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
