Home Router
Connection to the web is optional. If web enabled devices such as PCs, laptops, tablets or phones
will be used to access the VS Omni, an ethernet or wireless connection must be made to the home
router. For wireless connections, refer to the Configuration section of this manual. For ethernet con-
nections, use outdoor rated Cat5e or Cat6 ethernet cable. Connect one end to the Control Pad and
the other to an available LAN port (not WAN) on the home router. Refer to diagram below.
Final Steps
With the wiring complete, find the Hub's cover. The inside of the cover is made of foam and contains
precut removable gaskets (shown below) that can be used to seal the low voltage exit. Remove a
gasket and wrap it around the low voltage wiring at the exit of the Hub. Work the gasket into the exit
slot until it is fully sealed then fasten the cover to the Hub.
Ethernet port
Router
LAN port
Hub Cover (inside)
Gasket
Bottom of Hub Enclosure
21
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
