Relay -
Select the relay that is wired to the heater. This option is only available
if the heater is configured as a heat pump or a gas heater.
Min Filter Speed -
Select the minimum speed that the Filter Pump will run while
the heater is active. This option is only available for 2-speed and VSP pumps.
Min Air Temperature -
Select the minimum air temperature that the heater will
be allowed to run. This option is only available if the heater is configured as a
Heat Pump.
Priority Duration -
Select the number of hours that this heater will run before the
secondary heater turns on.
Pump -
Configure the boost pump for the heater. This option is only available if
the heater is configured as a Solar heater.
Valve -
Configure the heating valve, if used. This option is only available if the
heater is configured as a Solar heater.
Solar Sensor -
Configure the solar sensor. This option is only available if the
heater is configured as a Solar heater.
Delete a Heater -
From this screen, if you wish to delete a heater that is currently
configured, select the Delete button can on the right of the name of the heater that
you wish to delete.
If Cleaners is selected:
Add Cleaner -
Pressing “Add Cleaner” from this screen will take you through the full
configuration for adding a new cleaner. These steps are described in the Advanced
Configuration Guide section of this manual.
Select a Cleaner -
Once you select a cleaner, all of the options for that cleaner will
appear on the next screen. These options are as follows:
Name -
Create a custom name if desired.
Type -
Select the type of cleaner that is configured (Pressure, Suction, Robotic,
In Floor).
Pump -
Configure the cleaner pump, if used.
Relay -
Select the relay that is wired to the cleaner. This option only appears if
the cleaner does not have an associated pump configured.
Valve -
Configure the cleaner valve, if used.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
46
