If Yes is selected:
What type of heater?
Select the type of heater that is connected to the VS Omni. Solar
heating is not an option for a Typical configuration -- only Heat Pump and Gas are avail-
able.
Would you like to add a relay controlled accessory?
Select whether or not you would like to con-
figure a relay controlled accessory. This can be configured as a water feature, a light (incandescent
or ColorLogic), a cleaner, or an accessory.
If Yes is selected:
Select the type of relay controlled accessory (water feature, light (incandescent or Color-
Logic), cleaner, accessory).
If Water Feature, Cleaner, or Accessory is selected:
Select Relay:
Choose the Smart Relay that the water feature is wired to.
NOTE: this option only appears if more than one Smart Relay is discovered.
With only one Smart Relay discovered, the VS Omni will automatically select
the relay for you.
If Light is selected:
Type of Light:
Choose the type of light that you want to configure. The options
are UCL (14V), CL4.0 (115V), CL2.5 (14V), Incandescent, and Other.
Select Relay:
Choose the Smart Relay that the light is wired to. NOTE: this
option only appears if more than one Smart Relay is discovered. With only one
Smart Relay discovered, the VS Omni will automatically select the relay for you.
Would you like to add a pump driven accessory?
Select whether or not you would like to con-
figure a pump driven accessory. NOTE: this option only appears if more than one variable speed
pump is discovered.
If Yes is selected:
Select the type of pump driven accessory (water feature, cleaner, accessory)
If Water Feature, Cleaner, or Accessory is selected:
Which Hayward Unique Address?
Select the HUA of the water feature, clean-
er, or accessory’s variable speed pump. NOTE: this option only appears if more
than two variable speed pumps are discovered. With only two variable speed
pumps discovered, the VS Omni will automatically select the HUA for you.
Configuration Summary
- The Configuration Summary screen appears once you reach the end
of the Configuration Wizard. This screen details all of the equipment that you have connected and
configured to your VS Omni. Verify that the information on this screen is correct and then press the
check mark to continue.
Finished with Configuration
- After verifying the configuration summary, you are now finished
with configuration and can choose to either save the configuration by pressing “Save and Restart”
or make an additional change to the configuration by pressing “Customize / Add Components”. If
you choose to edit the configuration, you will be brought to “Quick Edit” interface that allows you to
quickly select the equipment that you want to add or modify. See page 43 for information on Quick
Edit. Once you finish making your changes, save the configuration by pressing the save button on
the bottom of the screen.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
26
