Relay -
Select the relay that the accessory is wired to.
Delete an Accessory -
From this screen, if you wish to delete an accessory that is currently
configured, select the Delete button on the right of the name of the accessory that you wish
to delete.
NOTE: The system does not allow you to configure a pump or a valve to accessory equipment
in the Backyard.
If Sensors is selected:
Add Sensor -
Pressing “Add Sensor” from this screen will take you through the full configura-
tion for adding a new sensor. These steps are described in the Advanced Configuration Guide
section of this manual.
Select a Sensor -
Once you select a sensor, all of the options for that sensor will appear on
the next screen. These options are as follows:
Name -
Create a custom name if desired.
Location -
Select the location that the sensor is wired to.
Delete a sensor -
From this screen, if you wish to delete a sensor that is currently configured,
select the Delete button on the right of the name of the sensor that you wish to delete.
If Interlocks is selected:
Add Interlock -
Pressing “Add Interlock” from this screen will take you through the full con-
figuration for adding a new interlock. These steps are described in the Configuration Guide
portion of this manual.
Select an Interlock -
Selecting an interlock from this screen will allow you to view that in-
terlock’s configuration. However, you cannot edit a pre-existing interlock. In order to change
an interlock’s configuration, you have to delete the obsolete interlock and create a new one.
Delete an Interlock -
From this screen, if you wish to delete an interlock that is currently con-
figured, select the Delete button on the right of the name of the interlock that you wish to delete.
NOTE: If there are currently no interlocks configured on your system, then the button will ap-
pear as “Add Interlock” instead of “Interlocks”. In this case, pressing “Add Interlock” will take
you through the full configuration for adding a new interlock. These steps are described in the
Advanced Configuration Guide section of this manual. Once an interlock has been created, the
button will say “Interlocks”.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
50
