Chapter 3 Installation and Wiring GK600E User Manual
- 18 -
Mount the cover
On the completion of w iring, insert the buckle at higher part of the cover into the grooves at
middle housing as indicated by number "1" in Fig. 3-6, then push in the low er part of the
cover as indicated by "2". When a "click" sound heard, it indicates clamping has been
properly made. Tighten the screw s (provided only for 11/15kW model) in buckle grooves
as finish.
Fig. 3-6 Mount the cover
Mount the control panel
Use the mounting method as stated in Section 3.3.1.
ATTENTION:
Be sure to remove the control panel before opening the cover and mount the cover before
mounting the control panel.
3.3.3 Open & Mount the Covers of GK600E-4T18.5B and above
Rem ove the control panel
Use the remove method as stated in Section 3.3.1.
Open the lower cover
Loosen the tw o captive cover screw s at low er part of the low er cover by using cross
screw driver, as indicated by number "1" as show n in Fig. 3-7, then pull the cover out and
up as indicated by number "2".
Open the upper cover
Loosen the tw o captive cover screw s at low er part of the low er cover by using cross
screw driver, as indicated by number "3"
and “4” as shown in Fig. 3-7, then pull the cover
out and up as indicated by number "5".
1
1
2
