Global Contract Licence 2, Руководство по установке

Страница: 95 / 100

•Page globalcontract.com 94
GLOBAL
Contract
• Fall 2017
INSTALLATION GUIDELINES
L2BC2Hx • Corner Bookcase
Required Tools
NOTE: Open and assemble only one product
at a time to avoid a potential mix-up of parts
and hardware.
It is adviseable to assemble the unit on a
carpet to avoid scratches.
Safety Glasses Rubber Mallet Screwdriver #2 Phillips
Included Hardware
Connecting Dowel Connecting Cam Glide Shelf Support
Assembly
STEP 1: Unpack and inspect individual pieces for damages or missing hardware
STEP 2: Pick a clean unobstructed area to assemble desk. It is advisable to as-
sembly of this product upright.
STEP 3: Lay short back panel with exposed holes for shelf adjustment facing up.
Insert connecting dowels in pre-drilled holes along bottom.
a. Attach bottom shelf by ling up installed connecting dowels with connecting
cam installed on the bottom of the shelf. Using screwdriver, turn connecting
cam to 2 O’clock position to secure.
STEP 4: Lay long back panel on ground with exposed holes for shelf adjustment
facing up. Install connecting dowels in pre-drilled holes on the back side and along
bottom.
STEP 5: Attach assembled short panel with bottom by lining up the connecting
dowels with the connecting cams. Using screwdriver, turn quick fi t cam to 2 O’clock
position to secure. Install levellers into T nut inserts, install into pre-drilled holes on
the bottom using mallet.
STEP 6: Stand assembly upright.
STEP 7: Install connecting dowels in pre-drilled holes on top edge the end panels.
Place top panel onto assembly lining up the connecting dowels with the connecting
cam. Using screwdriver, turn quick fi t cam to 2 O’clock position to secure.
STEP 8: Arrange shelf support pins as required and install shelves. Note that you
are able to secure shelves in place by screwing the shelf support pin to the under-
side of the shelf after fi nal positioning has been done.
“T” Nut Insert
L007250039
TOP
SHELF
BOTTOM
END PANEL END PANEL