Global Contract Licence 2, Руководство по установке

Страница: 79 / 100

•Page globalcontract.com 78
GLOBAL
Contract
• Fall 2017
viceversa®
Safety Glasses
Allenkeys
Rubber Mallet
Nylon Block
Screwdriver Metal Pick
Required Tools
Leg attachment to surface
STEP 1: Place the worksurface on the fl oor upside down.
IMPORTANT:
Ensure there are no foreign items on the fl oor that could damage the fi nish of the
surface. It is recommended the installation of the legs be done on either a padded
blanket or cardboard.
STEP 2: Position the appropriate leg(s) over the 4 metal inserts located in the
worksurface, and attach with supplied bolts. Use 2 wood screws (1”x#10) to lock
each leg into position.
STEP 3: Once all legs are attached securely, invert the completed unit, locate it ac-
cording to the installation plan.
STEP 4: The unit can now be leveled. There are nine holes on each leg for the pur-
pose of adjusting the height of the unit. The holes are located at 1” increments.
STEP 5 For fi ne-tuning of leveling, simply turn the leveling glide on the bottom of
the leg, or caster, until level is accomplished.
STEP 6: To change the leveling glide to a caster, or locking caster, remove the exist-
ing casting by threading it all the way out of the leg. Screw in the desired product,
and level as above.
1
2
3 4 5 6
INSTALLATION GUIDELINES