Global Contract Licence 2, Руководство по установке

Страница: 61 / 100

•Page globalcontract.com 60
GLOBAL
Contract
• Fall 2017
INSTALLATION GUIDELINES
L2TCDxxxxxx
Assembly
Required Tools
Safety Glasses Screwdriver #2 Robertson
Wood Screw #8 3/4
L007250032
Included Hardware
NOTE: Open and assemble only one product
at a time to avoid a potential mix-up of parts
and hardware.
It is adviseable to assemble the unit on a
carpet to avoid scratches.
L2TCRxxxx L2TCAxxxxL L2TCPxxxxR L2TCWxxxxxxL/R
Installation For Similar Products
STEP 1: Unpack and inspect individual pieces for damages or missing hardware.
STEP 2: Pick a clean unobstructed area to assemble desk. This unit is best to as-
semble upside down.
STEP 3: Place worksurface face down on clean unobstructed area.
STEP 4: Place monoleg(s) as per product evenly spaced leaving overhang based on
shape of worksurface top. Using #8x 3/4 wood screws to secure to the bottom of
the surface.
STEP 5: This product is shipped with “HAT” channel support bar, install along the
bottom of the surface.
Note: Please allow room to install a keyboard tray at the users edge if needed.
STEP 6: This product is intended to gang to existing assembly. Using fl at brackets,
install with #8x 3/4 wood screws.
Left Hand Shown
Flat Bracket
L005650025
WORKSURFACE
HAT CHANNEL
MONOLEG
BHML03 (default)
or
LLSQ3X3H28