manualshive.com logo in svg

Global Contract Licence 2, Руководство по установке

Поделиться
Скачать
Global Contract Licence 2 Скачать руководство пользователя страница 73

•Page

globalcontract.com

72

GLOBAL

Contract

• Fall 2017

Kadin Tables

Note: First assemble the depth, then assemble the width of the table.

Start at one end of the table and work your way through to the other end

STEP 1: Insert the slider into the groove. Align the slider’s hole with the diecast 
support’s hole (Or plastic support’s Hole) and secure them together with the 
provided screw.

STEP 1b:Plastic supports are to be used at the seams between two adjoining 
table tops.

STEP 2: Attach the legs to either side of the beam with the provided screws.

STEP 3: Once one side is complete, attach the remaining beams to the 
assembly and add the provided diecast supports (tables up to 48” will not 
include diecast supports).

STEP 4: Each top will include metal inserts - connect the legs and supports to 
the top with the provided machine screws.

Required Tools

Safety Glasses

Rubber Mallet

Drill

Allenkey 3/16”

2 Way Connector

3 Way Connector

2 Way Connector 60 Degree

Beam

Plastic Support

1/4 -20- 0.5 Screw

Diecast Support

Leg

Slider

1

1

1b

1b

Included Hardware

INSTALLATION GUIDELINES

Содержание Licence 2





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды