Global Contract Licence 2, Руководство по установке

Страница: 92 / 100

Page • globalcontract.com 91
• Fall 2017
GLOBAL
Contract
INSTALLATION GUIDELINES
Wall Mount Storage
Licence wall mount overheads are shipped fully assembled.
STEP 1: Placement on a wall, insure that the wall has load bearing capability.
Hardware to attach to a wall is not provided as different hardware is required for
different types of walls. In ALL cases, it is important to use fastening hardware
suitable for the load and the type of wall.
STEP 2: Wall mount bracket is 2 laminate boards cut with 45 degree angle at
top so that when placed together they will fully engage. Bottom board will be
mounted to the wall with “high” side facing out from the wall.
STEP 3: Once mounted and secured, the overhead can be placed on the wall en-
gaging wall mount hardware. On the inside of the cabinet, drive a screw though
the back wall of the overhead into the wall mounted laminate strip to full secure.
2
1
3
Front away from wall
Installed on the overhead