Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 48 / 108

48 GigaVUE TA Series Hardware Installation Guide
Four-Post Rack Methods:
GigaVUE Traffic Aggregation nodes also come with a pair of full length mounting rails.
These rails can be used for four point mounting on four-post racks. The keyhole rivets
on the sides of each node can be used to adjust the fit of the node to the desired
position or dimension on the rack.
Figure 3-2: GigaVUE Traffic Aggregator with Rail Mounting for Four-Post Racks
To mount the GigaVUE Traffic Aggregation node in a four-post rack:
1.
Attach the orange rack ears to the front of the unit using the supplied screws.
Figure 3-3: Front View of the Mounted Node to the Four-Post Rack
Keyhole Rivets
Position of the node can be adjusted using
these rivets to mount to the rack dimensions.
There are 4 rivets to enable adjusting to
different dimensions of the rack.
Rails
You can slide in the rails for a four post
mounting to a rack.
Rear of the rack
Rails are screwed to the
back of the rack after
the node is mounted