Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 13 / 108

Introducing the GigaVUE TA Series 13
Figure 1-1: The GigaVUE-TA10 Chassis
Console and Mgmt Ports
Ports x1-x48
1Gb SFP/10Gb SFP+/10Gb DAC
Ports q1..q4
40Gb QSFP+
10Gb/1Gb Ports
The GigaVUE-TA10 Traffic Aggregator provides either 24 or 48
10Gb/1Gb ports (x1..x24 or x1..x48). There are also four 40Gb
ports (q1..q4) included with the 48-port GigaVUE-TA10. The
24-port GigaVUE-TA10 is called the GigaVUE-TA10A.
The 10Gb ports support SR/LR/ER/LRM optical and direct attach
copper SFP+ transceivers. You can also use 1Gb SX/LX or
copper SFPs in the 10Gb ports for 1Gb support.
In a cluster configuration, these ports can either be set as
network ports or as stack-link ports.
40Gb Ports
GigaVUE-TA10 Traffic Aggregator also includes four 40Gb ports (q1..q4)
suitable for use as tool ports for aggregated output to a matching 40Gb
port on a GigaVUE H Series node.
You can also configure card modes that let a 40Gb port operate as four
logical 10Gb ports. Once configured, cable a 40Gb port operating as four
10Gb ports to an optical patch panel or breakout panel, which takes a
40Gb QSFP+ input from the GigaVUE-TA10 and splits it to four
independent 10Gb output ports.
Console Port
Use the Console port for serial terminal connections to the
GigaVUE CLI. Unless you requested custom factory settings,
the serial settings are 8N1, 115,200 bps.
Management Port
Standard 10/100/1000 RJ45 Ethernet ports support remote
connections to the GigaVUE CLI using Telnet/SSH.
Green LED shows link status; amber LED shows activity.
This port is also used in a cluster configuration to manage
cluster traffic.