Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 32 / 108

32 GigaVUE TA Series Hardware Installation Guide
Figure 1-7: The GigaVUE-TA200 Chassis Front View
100Gb QSFP28 Ports:
32 + 32 = 64
Port Status LEDs
100Gb Ports
GigaVUE-TA200 Traffic Aggregator includes 64 100Gb ports (C1..C64). The top two rows are ports
C1 to C32. The bottom two rows are ports C33 to C64.
In a cluster configuration, these ports can either be set as network ports or as stack-link ports.
Console Port
Use the console port for serial terminal connections to the GigaVUE CLI. Unless
you requested custom factory settings, the serial settings are 8N1, 115,200 bps.
Management Port
Standard 10/100/1000 RJ45 Ethernet ports support remote connections to the
GigaVUE CLI using Telnet/SSH.
Green LED shows link status; amber LED shows activity.
This port is also used in a cluster configuration to manage cluster traffic.
LEDs: PWR, SYS, and FAN
USB Port
GigaVUE-TA200 Front View
Console and Mgmt Ports
100Gb/40Gb Ports
The GigaVUE-TA200 provides 64 QSFP28 ports, each
labeled with a C prefix. The ports are designated as C1 to
C64 from left to right when viewed from the front.
The ports are arranged in rows. The upper ports of each
slot have odd numbers: C1, C3, .. C31, and C33, C35, .. C63,
while the lower ports of each slot have even numbers: C2,
C4, .. C32, and C34, C36, .. C64.
The 100Gb ports can operate at 40Gb with QSFP+
transceivers.
Table 1-7: GigaVUE-TA200 Ports
Port Description
Mgmt Use the Mgmt port for remote configuration of the GigaVUE-TA200 Traffic Aggregator over a 10/100/
1000 Ethernet network.
Console Use the console port for local configuration of the GigaVUE-TA200 Traffic Aggregator over a serial
connection.
USB The USB port is not supported in software version 5.3.