Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 59 / 108

Basic Connections and Configuration 59
Figure 4-9: Setting COM Port Properties for the Console Connection
5.
Start the terminal connection. You may need to press Enter a few times
before you see the login: prompt.
6.
Log in to the command-line interface with the following default user
account and password:
User admin
Password admin123A!
Starting in software version 4.7, the configuration jump-start automatically
starts and forces a password change.
The system administrator must change the password on the default admin
account through the jump-start script. The default password (admin123A!) is
no longer allowed. Refer to Run the Jump-Start Script on page 60 for details.
A password must meet the following standards:
• include 8-30 characters
• include at least one numeral
• include at least one upper case letter
• include at least one lower case letter
• include at least one special character (for example, !, @, #, $, %, ^, &, or *
–, ASCII 0x21, 0x2F, 0x3A, 0x40, 0x5B, 0x5F, 0x7B, 0x7E)
At the Admin password? prompt in the jump-start script, enter a new
password that meets the standards, then confirm the password.