Gigamon GigaVUE TA Series Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 108

background image

C NEBS Level 3 Compliance

103

Intrabuilding Ports (RJ45)

WARNING

: The intrabuilding ports (RJ45) shall be connected to shielded and

grounded cables at both ends.

Class A2 Voltage Accessibility

The GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, or GigaVUE-TA200 shall be
located in a restricted access location where only crafts personnel are allowed access.

Class B Voltage Accessibility

The GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, or GigaVUE-TA200 shall be
located in a restricted access location where only crafts personnel are allowed access.

Equipment Grounding Systems

The GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, or GigaVUE-TA200 shall be
installed and connected to the (CBN).

Communication Equipment Grounding

The GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, or GigaVUE-TA200 is suitable
for connection to the (Central Office and CPE).

Bonding of Battery Return (BR) Input Terminals

The battery returns of the GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, or
GigaVUE-TA200 shall be connected as (DC-I).

Connections

a.

The GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, or GigaVUE-TA200
shall be grounded via a copper ground conductor #6 AWG for CPE installation.

b.

All bare grounding connection points to the GigaVUE-TA10, GigaVUE-TA40,
GigaVUE-TA100, or GigaVUE-TA200 shall be cleaned and coated with an
antioxidant solution before connections are made.

c.

All surfaces on the GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, or
GigaVUE-TA200 that are unplated shall be brought to a bright finish and treated
with an antioxidant solution before connections are made.

d.

All non-conductive surfaces on the GigaVUE-TA10, GigaVUE-TA40,
GigaVUE-TA100, or GigaVUE-TA200 shall be removed from all threads and
connection points to ensure electrical continuity.

e.

Multiple connectors shall not be secured by the same bolt assemblies.

«
...
101
102
103
104
105
...
»

Содержание GigaVUE TA Series













































































































Отзывы:

Нет отзывов

Похожие инструкции для GigaVUE TA Series

Бренд: Paradyne Страницы: 22

Бренд: E-Lins Страницы: 59

Бренд: E-Lins Страницы: 11

Бренд: E-Lins Страницы: 9

Бренд: E-Lins Страницы: 5

Network Video Recorders

Бренд: e-Line Technology Страницы: 34

Бренд: Salus Страницы: 16

Бренд: 3Com Страницы: 16

INTERNET PRIVACY PROTECTION

Бренд: AlphaShield Страницы: 49

FRDM-STBC-SA9500

Бренд: Freescale Semiconductor Страницы: 2

Бренд: BSD Networks Страницы: 7

Бренд: NEC Страницы: 2

8677 - BladeCenter Rack-mountable - Power Supply

Бренд: IBM Страницы: 126

Бренд: Omron Страницы: 13

Бренд: Intel Страницы: 26

Бренд: sound4 Страницы: 66

Бренд: NETGEAR Страницы: 152

Бренд: Planet Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды