Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 65 / 108

Basic Connections and Configuration 65
Advanced Features Licensing
GigaVUE-TA10, GigaVUE-TA40, GigaVUE-TA100, and GigaVUE-TA200
nodes can be clustered with GigaVUE H Series nodes. Clustering is enabled
with an Advanced Features License.
Contact your Sales representative for Advanced Features Licenses. Refer to
Contacting Sales on page 107 .
Command-Line Basics
This section provides a quick orientation to the GigaVUE TA Series
command-line interface – how to enter commands, how to get help, and so
on.
Command-Line Modes
The GigaVUE-OS can operate in one of three modes, each with its own set of
available commands – Standard, Enable, and Configure. When you first
launch the CLI, you start in Standard mode with access to a limited amount of
commands used to review system status. As you move from
Standard mode
to Enable mode to Configure mode, both the power and the number of
commands available increase, as summarized in Figure 4-10 .
N
OTE
:
If you are working simultaneously with multiple GigaVUE nodes, you
may want to assign each a separate hostname so its easy to identify
separate terminal sessions from the system prompt. Admin users can do this
in Configure mode with the
hostname <name> command.
Figure 4-10: GigaVUE-OS Command-Line Modes