Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 76 / 108

76 GigaVUE TA Series Hardware Installation Guide
create a few basic user accounts with different privilege levels. In general,
user privileges are as follows:
• Admin users have access to all command modes, including Standard,
Enable, and Configure. They also have full permissions for all
network, tool, and stack ports.
• Operator users have access to all command modes, including
Standard, Enable, and Configure. However, they only have access to
the network and tool ports associated with their user group. New
users are created with the operator role by default. You can add
additional roles with the
username <username> roles add <roles>
command.
•
Monitor users have access to the Standard and Enable command
modes. They cannot configure packet distribution (or any other global
GigaVUE TA Series node options), but they can use the show
command to review many of the settings in place on the node.
The following username commands create a new admin user and a new
operator user:
2.
Once you have configured these basic user accounts, use the show
usernames command to review your settings. Figure 4-12 shows some
sample show usernames output after several users have been added.
Figure 4-12: Reviewing the User List
Command Comments
(config) # username psandoval
password Nine9.Eight8!
(config) # username psandoval
roles add admin
Creates a new account named psandoval with a
password and grants it admin privileges.
(config) # username bcrawford
password Seven7.Six6!
Creates a new account named bcrawford with a
password. New users are automatically created with
default operator level privileges, so there is no need to
grant an additional role.