Gigamon GigaVUE TA Series, Руководство по установке оборудования

Страница: 17 / 108

Introducing the GigaVUE TA Series 17
Air Flow Direction
The air flow direction is from the front of the GigaVUE-TA40 chassis to the rear. The
rear-mounted fans pull air from the front to the back of the chassis. Install the chassis
so the intake air at the front of the chassis is cold.
AC and DC-Powered GigaVUE-TA40 Models
Gigamon provides both AC and DC-powered versions of the GigaVUE-TA40. Refer to
Connecting -48V DC Power Supplies on page 54 .
Table 1-2: GigaVUE-TA40 Ports
Port Description
Mgmt Use the Mgmt port for remote configuration of the GigaVUE-TA40 Traffic Aggregator over a 10/100/
1000 Ethernet network.
Console Use the console port for local configuration of the GigaVUE-TA40 Traffic Aggregator over a serial
connection.
Ports q1..q32 GigaVUE-TA40 includes 32 40Gb ports (q1..q32). The 40Gb ports can be used as a 40Gb ingress
port, or, as a high-speed tool port for aggregated output to a matching 40Gb port on a GigaVUE
H Series node.
From software version 5.5, GigaVUE-TA40 supports 4x10G breakout at port level. Port breakout
mode in GigaVUE-TA40 is configured as follows:
• 24 out of the 32 ports provide 4x10Gb breakout support. The first 12 ports and the last 12 ports
provide support for breakout functionality (with 96 sub-ports operating as 10Gb ports:)
Ports q1 to q12 and q21 to q32 support breakout functionality
Ports q13 to q20 do not support breakout functionality
• After breakout, sub-ports (breakout ports) are named as q1x1….q1x4, q2x1...q2x4 (similar to
other hardware platforms) to support the breakout functionality.
Transceivers For details about the supported transceivers and cable type, refer to the “GigaVUE-OS Compatibility
and Interoperability Matrix” .